Red Tag Gas Line, Furnace Repair, and Infraction Resolution Services
We offer licensed service for gas equipment infractions, including any red tag gas line or gas furnace red tagged for non-compliance or unsafe conditions.
Licensed Red Tag and Infraction Services for Gas Equipment
If you’ve received an infraction notice or a red tag from a gas utility or technician, it means your gas equipment has been found non-compliant or unsafe. Infractions may involve improper installations, missing safety components, or code violations. A red tag gas line indicates a hazard with the gas piping, while a gas furnace red tagged must be repaired before further use. GasFix Inc. is a TSSA-licensed gas contractor, and our technicians are fully trained to resolve red tag conditions safely and in compliance with code.
If your gas line or furnace has been red tagged, contact us today.
Licensed to Resolve Red Tags
We are a registered TSSA contractor with the authority to assess and repair systems issued with a red tag gas line or gas furnace red tagged by another technician or utility provider.
Full On-Site Diagnostics and Correction
Our technicians review the red tag notice, inspect the system, and provide a clear plan for resolution, including gas line repairs, fittings, control checks, and documentation.
Prepared for Immediate Repair
We carry over 300 common gas parts on each vehicle. If repairs are required, we can complete most jobs during the initial visit, reducing downtime.
Documentation for Utility Reconnection
Once repairs are complete, we perform the required safety check and submit the necessary paperwork to enable utility reconnection or clearance.
What Is a Gas Infraction?
An infraction is a formal notice indicating that a gas system, appliance, or installation violates Ontario safety regulations or TSSA code requirements. Infractions may not always result in a red tag but must still be corrected to avoid fines, service disruption, or future hazards. We provide repair and inspection services that resolve infractions issued during compliance checks or utility audits.
Infractions often include issues like missing shut-off valves, improper venting, incorrect gas line materials, or unauthorized appliance installation. We inspect the system based on the infraction notice, perform the necessary corrections, and issue documentation to confirm compliance.
Understanding Red Tags and How We Help Resolve Them
When a gas furnace is red tagged or a red tag gas line is issued, the system is shut down for safety reasons. This action is taken to prevent gas leaks, fire hazards, or unsafe combustion conditions. In most cases, the tag will specify whether the hazard is Type A (immediate danger) or Type B (needs correction within a set timeframe).
GasFix Inc. helps resolve these tags quickly by diagnosing the issue, completing the required repair or correction, and ensuring the system passes final inspection.
Red Tag Gas Line Repairs
When a red tag gas line is issued, it typically means the gas piping or fittings do not meet current safety standards. This could include leaks, improper materials, incorrect pipe sizing, or inadequate support. Our technicians locate the problem, isolate the section, and repair or replace the affected components using approved methods and materials. Once repaired, we pressure-test the line, perform a leak check, and confirm safe function.
- Leak detection using pressure testing
- Pipe repair or replacement using approved fittings
- Correction of code violations related to support or routing
- Documentation of work completed for TSSA compliance
- Utility clearance assistance following repairs
Gas Equipment Infraction Correction Services
Our team addresses gas infractions issued by inspectors or utility providers. Whether it involves venting, gas line work, shut-off valves, or missing safety features, we bring your system into compliance. This service is separate from red tags and focuses on resolving code violations that don’t necessarily require disconnection—but still need correction to avoid penalties or future red tagging.
- Correction of installation or material violations
- Replacement of outdated or missing safety devices
- Review of venting, shut-offs, and appliance location
- Licensed documentation to confirm resolution
- Scheduling available for follow-up inspections if needed
Red Tagged Gas Furnace Repairs
A gas furnace red tagged by a technician may result from a cracked heat exchanger, faulty safety switch, improper venting, or damaged control components. We perform a full diagnostic, address the safety issue, and repair or replace necessary parts. If the heat exchanger needs inspection, our technician will discuss the reason before proceeding, as this process can take over an hour.
- Full system check including ignition, flame sensor, and safety circuits
- Heat exchanger evaluated if symptoms suggest failure
- Replacement of faulty sensors, switches, or venting components
- Combustion and airflow tested for safe operation
- Clearance documentation provided upon resolution
Inspection Following a Red Tag Notice
We offer independent inspections to verify the condition of a red tag gas line or gas furnace red tagged by a third party. Our technician will assess the issue cited on the tag, explain whether correction is required, and prepare a quote for resolution. This service provides clarity for property owners or managers reviewing next steps.
- On-site review of red tag documentation
- Technical evaluation of system condition
- Explanation of any work required
- Written repair recommendation and cost estimate
- Option to complete repairs immediately if needed
Reconnection Readiness and Testing
After repairs are complete, utility services may require proof that the system is safe to operate. We perform ignition testing, leak checks, and safety switch verification before submitting clearance documentation. This step ensures your gas appliance or line is ready for inspection or reconnection.
- Final inspection for compliance
- Leak and ignition testing completed
- Functional safety devices reviewed
- Written clearance completed by licensed technician
- Guidance for scheduling utility reconnection
Preventative Red Tag Avoidance for Older Systems
If your gas system is older, we can inspect it before an issue becomes a red tag condition. We review venting, gas connections, safety switches, and component wear. This proactive service is ideal for properties with aging gas lines or furnaces.
- Assessment of furnace and line condition
- Inspection of burner, venting, and gas controls
- Review of common red tag triggers
- Report on current safety and compliance status
- Repair recommendations if problems are found
Common Reasons for a Gas Furnace Red Tagged
A gas furnace red tagged by a licensed technician indicates a condition that violates safety regulations or poses a risk during operation. Tags are issued during inspections or service visits when the furnace cannot be safely operated or fails to meet current code requirements.
Here are ten common reasons a gas furnace may be red tagged:
- Cracked or deteriorated heat exchanger
- Unstable or delayed burner ignition
- Bypassed or faulty safety switches
- Blocked or improperly installed venting
- Excessive carbon monoxide levels during combustion testing
- Gas valve leaks or faulty control components
- Missing or improperly placed manual gas shutoff
- Insufficient clearance from combustible materials
- Corroded, damaged, or misaligned burner assemblies
- Ductwork damage that restricts airflow and affects combustion
If your furnace has been red tagged, repairs must be completed by a licensed gas technician. Once corrected, the system must be tested and cleared before it can be safely returned to service.
Stay Informed About Red Tag and Infraction Safety Notices
Subscribe to our newsletter for updates on how to handle a red tag gas line, what to do if your gas furnace is red tagged, and how to resolve a gas-related infraction. Get clear, timely advice from licensed professionals to stay compliant and safe.
GasFix Inc. is a gas services company that provides expert solutions for homeowners across Hamilton, Burlington, Oakville, Grimsby, Waterdown, Dundas, Ancaster, Stoney Creek, Brantford, Carlisle, Flamborough, Copetown, Lincoln, Smithville, Mississauga, and the surrounding areas.